![]() ![]() If it is and you're afraid to go it alone, check out ifixit for more guides. NOTE: your computer may be slightly different. Bear in mind you have a 2011 Mac which if a 15' or 17' will suffer from Radeongate at some point (the chips are crap), youd be better saving money by buying. And that's it! Everything unscrewed and removed! Now let's put it back together again. When looking at the best SSD for MacBook Pro, there are few products that can match the performance and durability of the Samsung 970 EVO. Remove the four posts on the side of the hard drive with the T6 screwdriver. Remove those and you'll be able to lift up the hard drive and unplug it. It's being held in place by 4 more screws. With the panel removed you can see the hard drive. Be sure to place them somewhere safe so they don't roll away into oblivion. Use the #00 screwdriver to remove all the screws on the back. Here's the IFIXIT guide you'll need to follow: MacBook Pro 15' Unibody Early 2011 Hard Drive/IR Sensor Cable Replacement and here is the better part: MacBook Pro 15' Unibody (Mid 2012) Hard Drive Cable Product MacBook Pro 15' Unibody (Mid 2012) Hard Drive Cable 19. So shut down your laptop and flip it over. ![]() But since you've already gotten this far you're probably both inclined to get it done AND have a machine past warranty anyway. Opening up your MacBook Pro opens you to the possibility of messing something up and voiding your warranty so if that bothers you you can just sit tight with what you have. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |